Scope and cost guide

Roof repair cost

Start with a published planning range and worked example, then check its date, geography, unit, inclusions, and limits before comparing a DFW quote.

Compare against a real roof

Scope and cost guide

Source record

These sources support the factual guidance on this page. Project documents and current official records control when facts change.

Cost at a glance

Published planning numbers with visible assumptions

Cost item

Small leak repair

Published amount
$150–$500
Worked scale
One localized problem
What the number covers
Published range; cause and safe access still need confirmation

Cost item

Asphalt roof leak repair

Published amount
$350–$1,000
Worked scale
Broader diagnosis and repair
What the number covers
Can rise when underlayment, flashing, or decking is involved

Cost item

Shingle repair

Published amount
$200–$600 per 100 sq. ft.
Worked scale
100 sq. ft. × published unit
What the number covers
Material matching and a serviceable tie-in are required

Cost item

Cricket repair or rebuild

Published amount
$700–$1,300
Worked scale
One published detail range
What the number covers
Adjacent flashing and masonry access can change the scope

Published planning range

Data basis: HomeGuide national repair data retrieved August 31, 2026; use as a planning check before a DFW diagnosis and written repair scope.

Worked example

If a repair requires one 100-square-foot shingle area plus a separate cricket detail, the two published bands total $900–$1,900 before any concealed deck, interior, or masonry work. That sum is a budgeting exercise; the contractor must first show that both tasks address the actual water path.

What that price includes

A useful repair price names the investigation, temporary protection if needed, opening, compatible replacement material, flashing or deck tie-in, cleanup, photographs, and the boundary of the repaired area.

What moves the number

Easy one-story access and a known missing shingle stay near the smaller ranges. Steepness, emergency timing, interior protection, discontinued materials, wall or chimney work, hidden rot, and an uncertain entry path increase labor and risk.

Costs that must stay separate

Separate the diagnostic visit from permanent work when the source is unknown. Interior drywall, insulation, mold, framing, and a later full replacement are different scopes and should not be implied by the roof-only figure.

What a DFW quote must show

  • Diagnosis: Describe the suspected entry path, inspection limits, and whether the first charge covers investigation, temporary protection, or permanent work.
  • Safe access and opening: State how height, slope, weather, interior protection, and the removal needed to reach the detail affect the work.
  • Matching and tie-in: Confirm that compatible shingles, membrane, metal, or accessories exist and explain how the repair connects to serviceable roofing.
  • Flashing and deck extent: Set an approval method for concealed wall, chimney, penetration, or sheathing conditions discovered after opening.

Compare the proposed diagnosis, access, opening and tie-in work, matching material, flashing or deck repair, limits of the repair area, cleanup, evidence, and the contractor's response if the suspected source is wrong.

Request a measured DFW estimate to replace the roof repair cost planning range with current supplier, crew, public-fee, and property-specific numbers.

Common questions

Answers to check before you decide

What should I budget for roof repair cost?

Published consumer data puts a small asphalt roof leak repair around $150–$500, a broader asphalt leak repair around $350–$1,000, and a 100-square-foot shingle repair around $200–$600. Those are diagnosis-dependent ranges, not a promise that the first visible spot is the source.

Which inputs should competing proposals match?

Begin with small leak repair, asphalt roof leak repair, shingle repair, [cricket](/roofing-glossary#cricket) repair or rebuild, then compare removal, protection, access, public requirements, disposal, optional work, and closeout.

How should hidden work be priced?

Use a documented unit price, allowance, investigation step, or homeowner approval path. Final quantities and photographs should support the change.