Scope and cost guide
Roof tear-off and disposal cost
Start with a published planning range and worked example, then check its date, geography, unit, inclusions, and limits before comparing a DFW quote.
Compare against a real roofCost at a glance
Published planning numbers with visible assumptions
Cost item
Asphalt-shingle removal
- Published amount
- $1–$3 per sq. ft.
- Worked scale
- 2,500 sq. ft. = $2,500–$7,500
- What the number covers
- Published labor/removal range; layers, slope, and handling affect it
Cost item
Dallas commercial gate charge
- Published amount
- $43.60 per ton
- Worked scale
- Scale weight × $43.60
- What the number covers
- City landfill component for qualifying individually paid loads
Cost item
Dallas environmental fee
- Published amount
- $2 per ton
- Worked scale
- Scale weight × $2
- What the number covers
- Added city fee
Cost item
Dallas processing fee
- Published amount
- $2 per ton
- Worked scale
- Scale weight × $2
- What the number covers
- Added city fee; uncovered loads may incur another $40
Published planning range
Data basis: HomeGuide national removal data dated November 7, 2025 plus City of Dallas landfill rates retrieved August 31, 2026; neither figure is an At-Cost crew or hauling quote.
Worked example
At the Dallas gate, the listed $43.60 + $2 + $2 components equal $47.60 per ton. A hypothetical three-ton covered load would create $142.80 in those gate components. That is not the tear-off total: crew removal, property protection, trailer or container, loading, hauling, time, and deck cleanup remain outside it.
What that price includes
A complete tear-off line names assumed material and layer count, measured roof area, slope and stories, debris path, protection for the property, container or trailer access, included loads or weight, haul destination, and the deck condition left for inspection.
What moves the number
One layer on a walkable single-story roof is different from multiple coverings, wet low-slope material, tile or slate weight, steep planes, tight lots, long carry paths, pool or landscape protection, and limited container access.
Costs that must stay separate
Additional layers, deck replacement, hazardous material, structural debris, permit charges, landscaping repair, and an uncovered-load penalty should not be silently absorbed into a generic disposal allowance.
What a DFW quote must show
- Layers and material type: State the assumed coverings and what additional shingles, membrane, metal, tile, or wet material will cost to remove.
- Roof area, slope, and height: Use measured surface area and describe geometry that changes crew movement, debris control, or handling.
- Property protection: List protection for windows, doors, siding, landscaping, paving, pools, equipment, and occupied entrances.
- Handling and container access: Explain how debris reaches the trailer or container and whether tight access requires extra movement or smaller loads.
Match roof area, layers, material weights, slope, stories, property protection, crew handling, container or trailer access, haul distance, disposal inclusion, deck cleanup, and evidence for any added layer charge.
Request a measured DFW estimate to replace the roof tear-off and disposal cost planning range with current supplier, crew, public-fee, and property-specific numbers.
Common questions
Answers to check before you decide
What should I budget for roof tear-off and disposal cost?
Published removal labor for [asphalt shingles](/roofing-glossary#asphalt-shingles) is about $1–$3 per square foot, so a 2,500-square-foot roof creates a $2,500–$7,500 [tear-off](/roofing-glossary#tear-off) planning band. Dallas's McCommas Bluff commercial gate components total $47.60 per ton for an individually paid load, but landfill price is only one part of hauling and disposal.
Which inputs should competing proposals match?
Begin with asphalt-shingle removal, dallas commercial gate charge, dallas environmental fee, dallas processing fee, then compare removal, protection, access, public requirements, disposal, optional work, and closeout.
How should hidden work be priced?
Use a documented unit price, allowance, investigation step, or homeowner approval path. Final quantities and photographs should support the change.
Keep reading
Roofing change orders without surprises
A change order should identify the new condition, price, evidence, and authorization before work expands.
Related guideWhen roof decking needs replacement
Decking decisions should follow tear-off evidence, code, fastener holding, and agreed unit prices.
Related guideHow to read a roofing estimate line by line
Compare quantities, materials, labor, accessories, allowances, exclusions, and contractor fees.
Related guideSynthetic slate roofing buyer's guide
A named synthetic slate product may weigh less than natural slate, but composition, installed weight, slope, fastening, fire classification, wind resistance, and repair conditions are.